主机¶
编码含义解析¶
menu_display_xxx_clamp_15_off – 点火关闭时工作
menu_display_xxx_over_threshold_high – 行驶中工作
menu_display_xxx_standstill – 待机模式下工作
menu_display_xxx_after_disclaimer – 在某个提示之后工作
解锁工程菜单¶
在此之前,可能需先把 ODIS E 切换到编程模式
登录码(访问码): 12345
模块 5F → 匹配:
开发者模式 (Developer mode): 激活
更换汽车皮肤¶
有时把主机更换为另一台时,其上装的是另一款 VW 汽车的配置文件。
VW Tiguan 示例:
模块 5F → 编码:
byte_0_brand: _VW
byte_1_Car_Class: 3
byte_1_Car_Generation: 7
byte_2_Car_Derivate: 6
byte_2_Car_Derivate_Supplement: 0
→ 应用
同时通过蓝牙连接两台手机¶
模块 5F → 匹配:
function_configuration_phone:
- Support_second_phone: none → 改为
- Support_for_response_and_hold: off → on
- Dtmf_without_active_call: off → on
- _user_menu_three_way_calling: not_installed → installed
→ 应用
模块 17 → 编码:
telephone2_BAP: no → yes
→ 应用
ICC 电子语音放大器¶
要激活该放大器,需要加载参数数据集:
(ODIS 参数数据集)
加载参数数据集后必须长按开机键重启主机!
关闭主机启动时的音量突增¶
有时开启主机时,音量会比熄火前设定的响得多。
模块 5F → 匹配:
Adjustment_fm_tuner_mono_stereo:
- l_hf_stereo_lower_threshold: 20 dBµV (原为 37 dBµV)
→ 应用
关闭主机中的 AM 频段¶
左下角原本无用的 AM/FM“切换键”处会出现手动调谐电台的图标

登录码(访问码): 20103
模块 5F → 编码:
byte_14_AM_disable: 激活
→ 应用(重启模块)
登录码(访问码): 20103
5F – MMI / RNS
编码 - 07 → 长编码:
字节 1 – 位 1 (byte_14_AM_disable): 激活
退出 → 保存
主机开机画面¶
模块 5F → 编码:
字节 18 – 将 00 改为
01 — Hybrid
02 — GTD
03 — GTI
04 — BlueMotion
05 — E-Golf
06 — R-Line
07 — Golf R
→ 应用(重启模块)
音响系统标志
模块 5F → 匹配:
Startup_screen_sticker_hmi (默认值为 0000) - 改为
1 — fender premium audio system
2 — dynaudio
→ 应用
将主机菜单的翻页样式改为磁贴样式¶
模块 5F → 编码:
byte_17_Skinning: Skin_1 → Skin_5
→ 应用(重启模块)
5F – MMI / RNS
编码 - 07 → 长编码:
字节 17: Skin_1 → Skin_5
退出 → 保存
行驶中播放视频、行驶中使用 MirrorLink¶
Discover PRO
模块 5F → 匹配:
nhtsa_properties:
- nhtsa_limitation_switches_for_carplay_no_softKeyboard: 关闭 (CarPlay,行驶中调出键盘的可能性)
- nhtsa_limitation_switches_for_androidauto_limit_displayed_message_length: 关闭 (AA,行驶中取消对输出消息长度的限制)
- nhtsa_limitation_switches_for_androidauto_no_setup_configuration: 关闭 (AA,行驶中进入设置的可能性)
- nhtsa_limitation_switches_for_androidauto_no_text_input: 关闭 (AA,行驶中取消对文本输入的限制)
- nhtsa_limitation_switches_for_androidauto_no_video_playback: 关闭 (AA,行驶中播放视频的可能性)
→ 应用
对于其他所有设备,需额外加载专用的 ZDC 容器或用于 ODIS 的 XML 参数数据集 (ODIS 参数数据集)
主机中用于仪表设置的菜单¶
Škoda Octavia
模块 5F → 匹配:
Car_function_list_bap_gen2_extended:
- display_configuration_0x45: 激活
- display_configuration_0x45_msg_bus: CAN_Comfort
→ 应用
Off Road Display¶

在第二代 Tiguan 上,Composition Media 6"、Discover Media、Discover Pro 信息娱乐系统中无需在 5F 模块中编码即可工作。
模块 5F → 匹配:
Car_Function_Adaptations_Gen2
menu_display_compass → "active" (default not active)
menu_display_compass_over_threshold_high → "active" (default not active)
menu_display_compass_clamp_15_off → "active" (default not active)
→ 应用
Car_Function_List_BAP_Gen2
compass_0x15 "active" (default not active)
→ 应用
对于 Composition Media 8",需要执行 5F 模块的编码。
编码后模块中会存在一个无法清除的故障码,不影响任何功能
登录码(访问码): 20103
模块 5F → 编码:
字节 24 – 位 02 (Navigation System): 激活 (原为 "02" 00000010,现为 "06" 00000110)
→ 应用(重启模块)
登录码(访问码): 20103
5F – MMI / RNS
编码 - 07 → 长编码:
字节 24 – 位 2 (Navigation System): 激活
或直接修改二进制值 – 原为 "02" 00000010,现为 "06" 00000110
退出 → 保存
驾校模式¶
匹配后需要重启主机
模块 5F → 匹配:
Car_Function_Adaptations_Gen2:
- menu_display_driving_school – 未激活 改为 激活
- menu_display_driving_school_over_threshold_high – 未激活 改为 激活
Car_Function_List_CAN_Gen2:
- Driving_school – 不可用 改为 可用
→ 应用
启用个性化¶
编码必须在发动机未启动时进行
登录码(访问码): 20103
模块 17 → 编码:
字节 10 – 个性化
选择「开启」
→ 应用
登录码(访问码): 31347
模块 09 → 匹配:
个性化 / Personalisierung:
- Personalisierung_Profilfunkion → profiles_active
- Personalisierung_aktiv → Active
- Aktivierungsoption_im_HMI-Menue_sichtbar → Active
- Benutzerkontenverwaltung_in_HMI-Menue_sichtbar → Active
- Personalisierungsfunktionen_in_HMI-Menue_sichtbar → Active
- PSO_FSG_Setup2_Bit_1 → Active
- PSO_FSG_Setup2_Bit_2 → Active
→ 应用
个性化激活
执行该操作顺序是为了让车辆不会一直进入访客模式。
登录码(访问码): 31347
保存、确认、锁车。
模块 09 → 匹配:
个性化 / Personalisierung
- Profil_Variante: Konto (v. 1.x)
创建配置文件,然后改为:
登录码(访问码): 31347
保存、确认、锁车。模块 09 → 匹配:
个性化 / Personalisierung
- Profil_Variante: Konto (v. 2.x)
改为:
登录码(访问码): 31347
模块 09 → 匹配:
个性化 / Personalisierung
- Profil_Variante: Konto (v. 1.x)
使用 GLONASS 天线进行导航与指南针¶
Discover Pro · Discover Media
模块 5F → 匹配:
Navigation_GNSS_Receiver_Setting:
- default_hw_reception: 关闭
- gps: 关闭
- galileo: 关闭
- glonass: 关闭
- compass: 关闭
- external_gps_1: 激活
- external_gps_2: 关闭
→ 应用
模块 75 → 匹配:
GPS: internal_GPS_output_on_CAN
Navigation_Type: Type_2:
- Gnss_data_rate:
Data Rate: 5 Hz (原为 1)
→ 应用