驾驶辅助激活¶
激活 Lane Assist¶
激活该辅助功能不需要参数数据集
登录码(访问码): 20103
模块 A5 (辅助驾驶摄像头) → 编码:
ALDW_lane_assist: 已设置
→ 应用
在菜单中开启新功能
模块 5F (多媒体) → 匹配:
Car_Function_List_BAP_Gen2:
- LDW_HCA_0x19: 激活
- LDW_HCA_0x19_msg_bus: Terminal 15
Car_Function_Adaptations_Gen2:
- menu_display_Lane_Departure_Warning: 激活
- menu_display_Lane_Departure_Warning_over_threshold_high: 激活
→ 应用
HCA – 向转向机模块告知存在 Lane Assist
模块 44 (转向助力器) → 编码:
车道保持辅助,与转向助力器关联
字节 03 – 位 1 (heading_control_assist): 激活
→ 应用
登录码(访问码): 20103
模块 09 (车载电网) → 匹配:
Heading Control config: heading_control
→ 应用
开启 Lane Assist 在仪表上的显示
模块 17 (仪表/ActiveInfoDisplay) → 编码:
Lane_assist: yes
→ 应用
模块 A5 (辅助驾驶摄像头) → 匹配:
Lane_departure_warning_on_state: Selection_over_menu_default_on
→ 应用
Personalisation_for_lane_departure_warning:
- TT_activated_not_activated: last_setting
→ 应用
激活交通标志识别辅助 (车辆须配备摄像头)¶
激活该辅助功能可能需要参数数据集
车载摄像头将读取交通标志并在仪表中显示限速值。
模块 5F (多媒体) → 匹配:
Vehicle function list BAP:
- traffic_sign_recognition_0x21: 激活
Vehicle menu operation:
- menu_display_road_sign_identification: 激活
- menu_display_road_sign_identification_over_threshold_high: 激活
→ 应用
登录码(访问码): 20103
模块 A5 (辅助驾驶摄像头) → 编码:
字节 1 – 位 0 (Traffic Sign Recognition (FTE) active): 激活
→ 应用
模块 17 (仪表/ActiveInfoDisplay) → 编码:
字节 5 – 位 2: 激活
→ 应用
登录码(访问码): 20103
模块 A5 (辅助驾驶摄像头) → 匹配:
Display end of speed limit symbol: active
Display valid additional signs: 00100111
→ 应用
激活 Emergency 紧急辅助¶
激活该辅助功能可能需要参数数据集
登录码(访问码): 20103
模块 A5 (辅助驾驶摄像头) → 匹配:
EA_emergency_assist: Variant_2
→ 应用
模块 13 (自适应定速巡航) → 编码:
Emergency_steer_assist: 激活
→ 应用
模块 46 (舒适系统中央模块) → 编码:
central_locking_system_emergency_assist: 激活
→ 应用
在抬头显示中显示辅助功能¶
Audi
模块 82 → 编码:
Road sign detection: not available → available (显示交通标志)
Lane Departure Warning: not available → available (显示 Lane Assist)
→ 应用
在 Audi Q7 4M 上激活 Lane Assist¶
Warning
在出厂未激活 Lane Assist 的车辆上无法将其完全关闭。
原因是左侧转向拨杆端部没有机械按键:
模块 A5 (辅助驾驶摄像头) → 编码:
HC: Coded
HC_mob_line: Coded
→ 应用
模块 A5 (辅助驾驶摄像头) → 匹配:
Personalization of lane dept. warning Cl. 15 on: Off
→ 应用
登录码(访问码): 31347
模块 09 → 编码:
heading_control_config: heading_control
→ 应用
模块 44 → 编码:
Heading Control Assistant: Active
→ 应用
模块 5F → 匹配:
Car_Function_List_BAP_Gen2:
LDW_HCA_0x19: activated
LDW_HCA_0x19_msg_bus: Terminal 15
Car_Function_Adaptations_Gen2:
menu_display_Lane_Departure_Warning: activated
menu_display_Lane_Departure_Warning_over_threshold_high: activated
→ 应用
模块 17 → 编码:
Lane Assist: yes
→ 应用
模块 CB (如配备) → 编码:
HCA: Active
→ 应用
模块 82 (如配备) → 编码:
Lane Departure Warning: Available
→ 应用
模块 3C (如配备) → 编码:
Lane_Departure_Warning_System: with_Lane_Departure_Warning_System
→ 应用